Utah Pneumatic Push To Connect Air Fittings Tube y Splitter 3/8 Od Push Fit Fittings Tube Fittings Air Line Push Connectors 10 Pack (y Splitter 3/8)

Push Fit Fittings Are Generally Designed To Be Used With Air Lines Some Small Air Fittings Work With Polyethylene And Other Plastic Tubing Used In Water Filters, Aquariums And Ice Makers. However, Push Connect Fittings Usually Can’t Be Used With Flexible Copper Tubing And There’s A Large Variety Of Air Tube Fitting In The Market; In Fact, You Can Find Air Fittings D.I.Y Stores Push-Fit Pneumatic Fittings Grip The Attached Pipe With A Stainless Steel Ring That Has Teeth Inside The Fitting While The O-Ring(S) Ensure A Watertight Seal Around The Pipe. However, If The Edges Of The Pipe Aren’t Perfectly Round Or Have Dirt On The Surface, It’s Possible That The O-Rings Don’t Make A Tight Seal And Cause Leakage. Similarly, If The Pipe Isn’t Cut In A Perfect Square, It May Not Push In Evenly Inside The Fitting. That’s Why It’s Important To Use A Tubing Cutter To Cut The Pipe—Never Use A Hacksaw How To Install A Push Lock Fittings Other Than Using An Appropriate Tubing Cutter For The Pipe, Also Make Sure To Measure The Cut—Remember That The Attaching Pipe Will Extend Inside The Fitting Use A Deburring-Depth Gauge Tool To Indicate The Depth Of The Fitting And Then Push The Pneumatic Fitting Onto The End Of The Pipe To Attach It

• Air Line Quick Disconnect : Air And Water Pressure Range: 0-1 Mpa145 Psi Max Pressure:1.5 Mpa/ 217 Psi/15 Bar Temperature Range 0-60°C | 32～140°F Applicable Tube: Pu/Nylon/Soft Pe Air Line Fittings.
• Pushlock Air Fittings And Water Pressure Range: 0-1 Mpa145 Psi Max Pressure:1.5 Mpa/ 217 Psi/15 Bar Temperature Range 0-60°C | 32～140°F Applicable Tube: Pu/Nylon/Soft Pe Airline Fittings.
• Easy To Install This Quick Connect Tube Fittings Is Available In Various Styles And Models . Each Model To Serve Its Purpose. All Models Of Push Lock Fittings Are Designed To Suit Your Pneumatic Piping Needs Perfectly.
• You Can Easily Change The Air Line Quick Connect Direction Even After Installation. The Release Ring Of Conforms With The Ellipse Design To Ensure That The Disconnecting Of Air Line Connections Is In Good Shape.
• All Push-To-Connect Fittings Contains Internal Hexagonal Holes This Enhances The Installation Process In A Narrow Space.Push Connect Fittings Can Be Dismantled And Assembled Easily These Plastic Tube Connectors Meet The Pressures And Temperatures Mentioned.